Quote Originally Posted by truly_bent View Post
Just ran a screen grab of your logo through 3dp.rocks lithophane program. I set the max width to 50mm (about 2") and the depth to 6mm (about 1/4"). Then ran the resulting STL file through Netfabb to clean it up. There are plenty of options to choose from so i'm sure you can find something that works.You might want to slice off the base, but i'll let you figure that out.Edit: Just realized the stl file image is reversed. I guess you'll have to flip it first.
3dp rocks standardly makes the photo negative. (which in my opinion, you don't want). I always use www.itslitho.com for making these. You get a direct preview of what your design would look like, very handy!