Results 1 to 5 of 5
Thread: A couple of questions
Hybrid View
-
02-20-2015, 08:58 PM #1
- Join Date
- Dec 2014
- Posts
- 43
So I have done a couple of prints and everything is turning out pretty good. But the x belt is rubbing against the x-idler and makes a loud noise. When looking at the belt alignment I can see black rubber in the v rail. The gear on the stepper motor is all the way adjusted in with the gears facing towards the end of the shaft. Will flipping the gear around fix the issue?
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials