Results 1 to 4 of 4
Thread: Dondtech Extruder
-
02-03-2015, 01:46 PM #1
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
Dondtech Extruder
I put myself on the wait list for 2 of the Bondtech v2 3mm extruders
going to try a bowden setup.
http://www.bondtech.se/
-
02-03-2015, 07:11 PM #2
- Join Date
- Feb 2015
- Posts
- 70
Cool This probably goes without saying, but be sure to let us all know how it works.
-
02-03-2015, 10:09 PM #3
- Join Date
- Oct 2014
- Posts
- 134
May be interesting. Impossible to tell from the utter pittance of information presented in the two short videos. Says it is Creative Commons Attribution-NonCommercial-ShareAlike 4.0 but does not release enough information for anyone to duplicate it. A true Creative Commons Attribution-NonCommercial-ShareAlike 4.0 would include the details of the motor, the planetary gearbox, feed wheels, etc, but all that is released are the stl files for the shell of the project. I remain highly suspicious.
-
02-03-2015, 11:14 PM #4
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
Agreed,
I did find this post about it
http://3dprint.com/41127/bondtech-extruder-v2/
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials