Results 1 to 3 of 3
Thread: Holes in ABS print
Hybrid View
-
02-04-2015, 01:04 PM #1
- Join Date
- Feb 2015
- Posts
- 13
I'm no expert myself, but even the best of those looks a little stringy. It seems like an extrusion rate or z-calibration issue; either way the printer needs to smoosh each layer down onto the one below it a little. I don't use Cura, but it would be helpful to know more about your hardware.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials