Results 1 to 10 of 19
Thread: The micro. New video. 3dp tests
Hybrid View
-
01-24-2015, 03:19 PM #1
If the bed levelling isn't live that's probably why they force the massive raft. That's disappointing.
When you say bed calibration do you mean Z-gap adjustment?
Bed levelling (compensation) - touch off on several points and calculate the skew of the bed relative to the gantry, and adjust Z actively while the head moves across each layer to compensate for the hardware misalignment.
Z-gap adjustment - setting the offset from the extruder tip to the bed. If it is out by much more than 0.1 mm you will get a bad start to the print (either too high or too low - nozzle scraping across the BuildTak).
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials