try using a mouse and scroll down to change the size. if not mabey try youtube for help
Type: Posts; User: 3DPrinterMan1234
try using a mouse and scroll down to change the size. if not mabey try youtube for help
just a side note i don't think you should be printing the same size as your nozzle just something to keep in mind if you want to print bigger layer lines change out your nozzle.
Mabey add some...
all good glad to help
HIit should be pretty smooth if all things are going well. So clearly there is something going wrong. I would maybe try replacing the rollers if you think that is the issue. you could also try...
i had the same problem but in the other way
Hello 3D printing community I have had my ender three for just over a year now and i have never really had many problems with it until today i was printing a file that i have designed i will leave a...
Have you tried printing with susports
Awesome great
IS the nozzle the standard 0.4mm the genial rule is no bigger that 75% of the nozzle size.
It depends on price.
Review can be helpful speed not so much, if warranty is important to you look for a good warranty but it doesn't really matter in my opinion. Tech support can be found at...
Yeah good luck
Try lowering the print temp and leveling the bed
In the support section there will be a setting called support pattern try changing that. if it doesn't show up click the slider button and click the box next to support pattern.
glad i could help
You could try a firmware like th3ds or marlin this is a link for the th3d version. https://www.youtube.com/watch?v=cD3BTMKq3GA
it could be a z axis loose or bent that's probably my only idea. :)
I think you need to use different supports so that it is properly being supported.
i don't think that is the actual bed i think you are printing of the wrong thing i dont think that is the problem but
Ok great that it work out
You could try using z hop if you think it is hitting something just turn it in your slicer.
Hello
It looks like wet pla you can tell if you extrude some and you hear a crackling noise or see steam coming off. This can be fixed by drying it out there are plenty of good videos using a oven...
Have you tries using youtube for help.
on the inner side of the box where the wall is coming off
Just watch the fumes
A couple of ideas
1. it could be a filament tangle makers muse has a great fix https://www.youtube.com/watch?v=c20nrF4b8-g
2. usually speaking all filament should work ok but here is a guide...