Bassna
Engineer

it's an I3 design. So the bed just goes backwards and forwards. The print head already goes left to right and up and down. To make the head go...

we need an actual budget. what's the most you can afford to spend ? Also what sort of things do you want to print ? For example, role playing...

Hmm have to reattach the other two pics

lol have to admit I've had bugger all to do since bikeracer2020 joined the 'staff' (well, staff suggests monetary renumeration - and there is none...

right. done a rocket like the one you print but with fines set to cause spin during flight. whats the actual height and main diameter of the one...

what ? I've seen all the bits you've made for your various printers, I'd say your design skills are better than mine. I've actually got a...

I always make sure I have enough filament before I start a print. :-)

most likely parts of the mnodel are thinner than your nozzle width. So they'll show up mwhen viewed, but not after slicing. Try playing with it...

Makes sense, usually if a nozzle catches a print, it knocks the print off the build plate, But if the drive cogs are looses, it could perceivavbly...

which printer did you get ? And ecellent modelling skills ! Wish I could do the artistic stuff. How are you doing the leather stamps ? ...

Nope. Like everything else if you keep the draw clean it's fine. If you don't it isn't. Whether the divider is 3dprinted or not - isn't an...

check belt tension and particular that the drive gear grub screws are tight and that the gears aren't loose. That's usually the source of this...