Close



Results 1 to 6 of 6
  1. #1
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    920
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse

    Hyrel Material Compatibility

    MK-1 Tool

    The MK-1 is a modular, hot-swappable head which prints 1.75mm filament at up to 250C.

    Validated Materials:



    Not Yet Validated Materials
    (no issues anticipated):

    • Ultem

    If you have suggestions of material for us to test, please let me know.
    Last edited by Davo; 02-04-2016 at 02:45 PM. Reason: more materials tested

  2. #2
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    920
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    The EMO-25 Tool

    The EMO-25 is a modular, hot-swappable head which prints in any pasty extrudable which is printable at room temperature (with a consistency between mayonnaise and peanut butter).

    Validated Materials:




    If you have suggestions of material for us to test, please let me know.
    Last edited by Davo; 09-16-2015 at 10:17 AM.

  3. #3
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    920
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    The COD-25 Tool

    The COD-25 is a modular, hot-swappable head which prints in resins at room temperature; we photoinitiate crosslinking as we dispense.

    Validated Materials:





    If you have suggestions of material for us to test, please let me know, along with the wavelength for crosslinking.
    Last edited by Davo; 01-15-2015 at 04:41 PM.

  4. #4
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    920
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    The MK1-450 Tool

    The MK1-350 is a modular, hot-swappable head which prints 1.75mm filaments at up to 450C

    Validated Materials:


    Last edited by Davo; 07-25-2016 at 04:01 PM.

  5. #5
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    920
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    The KRA-15 Tool

    The KRA-25 is a modular, hot-swappable head which prints in any pasty extrudable which is printable at up to 150C

    Validated Materials:




    If you have suggestions of material for us to test, please let me know.
    Last edited by Davo; 10-12-2015 at 12:58 PM.

  6. #6
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    920
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    Added PEEK for the MK1-350.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •