Close



Results 1 to 3 of 3

Thread: SainSmart 2in1

  1. #1
    Student
    Join Date
    Mar 2014
    Location
    Vienna
    Posts
    47

    SainSmart 2in1 - Help needed!

    Hi,

    after runing my I3XL printer for quite a time without any issues, I thought it would be good to have a second one.

    I try to get the new DIY printer running with the SainSmart 2in1 board, but since I want to have Dual Extruder Setup Im struggeling with the thermistor ports.

    SainSmart 2in1.jpg
    They are named wit T0, T1 and T2, as you can see on the Picture.


    Thermistor Ports.jpg



    The SainSmart wiki says, that T0 would be for the first Extruder, T1 FOR THE BED and then T2 for the 2nd Extruder but I doubt that, because the wiki is really outdated and Marlin 1.1 have had many changes till then.

    Does anyone here has some experience with the board and the Thermistors using Marlin latest firmware?

    BR, Ralf
    Last edited by ciutateivissa; 09-17-2017 at 12:41 PM. Reason: Poor Response

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    5,591
    well judging by the rest of the board the heatbed would be t2.

  3. #3
    Student
    Join Date
    Mar 2014
    Location
    Vienna
    Posts
    47
    I think the same, but someone here with practical experience?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •