breaking prints due to sticking TO much

[troyster84]

I was having issues with curling on the edges when printing things, so i thought it was time to ditch the blue masking tape and print directly on my acrylic bed. but now things are sticking and i am breaking them when trying to removing them.

should i be coating my bed with something to help with release or is it to much filament on my first layer?

Please help

Thanks

Troy

[LambdaFF]

If it's too much filament on the 1st layer, you would see it easily : in that case the filament "piles up" and you have blobs being formed.

[troyster84]

Yeah the first layer looks just as nice as the rest, so i guess its not to much, i tried rubbing some vegetable oil on the bed and it seemed to have helped with my first trial print we will find out once i get home tonight to see if it worked for the second.

[Labbo1979]

Maybe use Sitall glass? i read about it on 3dprinterchat https://3dprinterchat.com/2016/02/si...-glue-or-tape/ I dont use that though i use wolfbite but Magicgoo pens have also been awesome