Results 1 to 2 of 2
Thread: Z18 limit to small prints
-
04-20-2015, 06:05 AM #1
- Join Date
- Mar 2015
- Posts
- 18
Z18 limit to small prints
Hi all,
Does anyone have experience with small (<50mm) prints at good quality on a Z18 as parts only come out correctly at larger sizes. Often stringing on the base.
- 0.15mm resolution
- 5th Gen High Base
- 200 °
- Lower to 180 ° on Color Fabb to stop raft stick
- Roof layer count 4
- Shells 2
- Outlines 15
For moving parts I change: - "feedDiameter": 1.80,
- "feedstockMultiplier": 1.10 on small parts doesn't work tried higher values but too many holes in prints
-
04-22-2015, 09:06 AM #2
- Join Date
- Sep 2014
- Posts
- 19
Hi,
Z18 is designed for bigger prints and the quality is also great. Do you have a lot of retractions of the small parts? Have you tried using Dust filter, it can reduce the stringing and increase the quality of the parts.
Ender 3 Neo - Jam Problem
Yesterday, 12:39 PM in Tips, Tricks and Tech Help