so another problem popped up. I finally decided to do a calibration cube on my Linear Plus, and then here's what happened. Y and Z axis are okay, but the X oomph. However, I cannot get into the...
Type: Posts; User: iamthebest22
so another problem popped up. I finally decided to do a calibration cube on my Linear Plus, and then here's what happened. Y and Z axis are okay, but the X oomph. However, I cannot get into the...
Yeah it's really nice, just too bad can't change certain settings, the z-stop you need the exact type or similar types. There is an actual facebook group for this Ezbed, he's currently working on a...
Printed dampeners and then a benchy, will do the better fan shroud tomorrow.
The benchy was printed at 85mm/s seem like still a little bit of overextrusion?
https://i.imgur.com/noViN5Pl.jpg...
I got my Ezbed and the limit switch needed. 30 minutes of me noob trying to solder the wires xD, and then putting the bracket and the program... Wow.... It's not perfect, and I feel Like I may have...
Okay so a new video came out, and it looks like I'm not the only one with this problem, it seems to be just the Linear Rails version. Here's the vid. https://www.youtube.com/watch?v=-e3UXj5ly3U ...
I did from the 1.1.4 version to 1.1.5. Here's the weird thing. I went back to 1.1.4 again, and did the same thing, the results seem to be better in 1.1.4 than in 1.1.5, however still not leveled, but...
well it's not too far off, more like 89 degrees or 88 possibly.
Okay then, guess I will print out the manually level knobs and make it so the bed is 90 to the towers on all 3 sides, once my PETG arrives >.>
Oh and see if they are 90 degrees? No need, I can tell you right now they are NOT, do they need to be? guess if I'm going to do leveling knobs they shouldbe, since ABL/UBL isn't working for some...
Oh you're talking about the G29 using 3 point. I set the points properly, but then it move to the first point, doesn't even probe it and just stops. Right now trying out UBL but it didn't work...
Oh no the X tower is at the back, the Y tower is on the left while the Z tower is on the right. that is if you look at this video:...
How do you clear the eeprom, isn't it M502?
Yes, G1 Y-35 move the nozzle tip between the X and Y tower, but to where the probe tip was exactly.
I did something similar to what you did with the G92...
I think there's something wrong with my printer itself, even after both G33 calibrations and G29 using UBL and activated, the nozzle is still hitting the bed on one end and way higher on the other...
Yeah you got that right, well at least I still have the He3D that you told me to get. I'm posting on both the facebook group and Marlin group to get help and see if they can figure it out. There is a...
Oh no I know how to calculate that, it's just that the funny thing is even though it should be +y, when I do G1 Y-35, The nozzle tips moves from x0 y0 to exactly where the probe is. Hmm weird, I'm...
Okay just tried to use 3 Point, and it only goes to the first point and stops there. here is the whole marlin 1.1.5 https://www.dropbox.com/s/oac2zq740dp11sq/Marlin_1.1.5_3D_point.zip?dl=0
and the...
Okay sorry another question xD if I use G33 P7 to get all the calibration points, should I still be using G29 to probe? Or if I'm going to use G29 whether it be 3D point or Bilinear, should I leave...
Okay I will try that maybe tomorrow, I'm almost ready to give up on this machine, thin I might stick with Cartesians for now. Got a Hypercube Evolution (coreXY) on the side in the room beside me...
Okay so hopefully i got it now, say right now my nozzle is at X0 Y0, I've marked the place on the bed where the tip of the Probe (BLtouch) in this case is, then I move the nozzle to where the that...
Okay I'm getting a little confused about setting the X or Y probe offset for my BLtouch. Is it what the probe tip has to move to where the nozzle is in the center or the other way around? (which...
Hmm then there is something wrong then, because this is after G29 and then print, and I get this: https://www.dropbox.com/s/d0n4ixwm060viw9/2017-09-06%2022.40.09.jpg?dl=0
yeah I'm an idiot, I just learned that last night xD. Okay so right now, it seems like it's a gcode thing. I only do a G28 follow by a G33 P7 or G29 then M500, but apparently because of the slicers...
believe it or not, the rods are 266.7mm double checked just to be sure
Right yeah I rechecked the probe offset, and it was definitely not X+35 Y+10 it was Y +35 and X-5. However, I feel that my...
That is what's bugging me, it is if I print the 3d parts, but because it has a heated bed which goes up to 105, I need ABS, which I don't have right now. so no not really adjustable. Right now I'm...
Well, I ordered the He3D, then first got an Anycubic Kossel linear Plus in the mail, which super confused me xD. Turns out my mother found out about me doing 3d printing, so she got it for me as a...