simplify3d

[RobH2]

S3d.......

Me too. Do you mind sharing your .fff for ABS with me. I haven't fine tuned it yet. I'll be glad to give you my PLA profiles if you want them.

[beerdart]

Just change the .stl to .fff after download as the site will not accept .fff files.

[RobH2]

.......4ABSWIP.stl..........

This is an .stl file and when I import it, it crashes S3D. Did you send the .stl by mistake instead of the profile, '.fff' ?

Here are my PLA profiles if anyone wants to look at them.

Simplify3D_RH-PLA Profiles.zip

[RobH2]

............4ABSWIP.stl...............

Tricky, got it, cool, thanks. So did the site not want to let you attach an .fff so you changed it to .stl? If so, good trick.

Edit:
yea, it's not working correctly. I doesn't bring in your settings. It opens and displays the name but all the settings are mine. Can you .zip your .fff and resend it?

[beerdart]

Correct the site would not accept .fff

Tricky, got it, cool, thanks. So did the site not want to let you attach an .fff so you changed it to .stl? If so, good trick.

[beerdart]

A few more test print from yesterdays snow day..

Cura with the same base settings as the S3D at .1 layer height

[beerdart]

Next is S3D at .2 layer height. Looks clean my conclusion is the .4 nozzle is flowing too much for the .1 layer height.

[beerdart]

Another cute feature is the ability to import a photo or any graphic and 3D slice it.

[adamfilip]

An update has been released with some interesting improvements
http://www.simplify3d.com/get-your-calipers/

[pichuete]

hi guys so after almost a month battling with some mechanical and firmware issues, now im starting to get "Decent" prints . but now im struggling to get retraction to work properly . im not getting a lot of oozing over the print but i have notice this gaps / Blobs every layer change or when the nozzle move to another spot. Im using the Stock Extruder (gregs)

i was wondering what setting for retraction is working for you and how can i minimize this .