Results 51 to 52 of 52
Thread: Clogged nozzle
-
06-11-2015, 01:54 PM #51
heat your nozzle up and pull the junk off with a rag or a glove. wipe as much as you can off. maybe some acetone on a rag for any tough residue once you cool it back down. maybe go past your printing temp a little to help melt it off. then go after your clog.
-
06-11-2015, 02:51 PM #52
- Join Date
- Jun 2015
- Posts
- 3
Worked like a charm. Thanks for your input!
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion