Results 11 to 12 of 12
-
01-10-2015, 11:58 AM #11
- Join Date
- Nov 2014
- Posts
- 58
Can somone give me some light here . my printer was printer almos perfect since day 1 . and now im having inconsistency and this "weavy" efect in all of my prints . i have check the belts tension and posible loose parts but everything seems to be tight . also i have notice that i have a woobly threader rod but that has been like that since day one .
any help will be appreciate it
Machine: Makerfarm Prusa i3v 12"
Filament: Makergeeks Orange 3mm ABS
Hot end: Hexagon 3mm, .4mm nozzle
Heat settings: Bed 100c, Hotend 230c
Slicer: Sil3r Stock Maker Farm Settings at 230 C
-
01-12-2015, 08:32 AM #12
I would say if everything is tight, (grub screws on gt pulleys, mounting screws on the motors, belts, essentric spacers, x carriage to nozzle bolts, glass to bed), it's definitely possible that over time you have reached a part of filament in your spool that has different dimensions than the first part of your spool which you calibrated to or were happy with without needing a calibration. I could see where a slight over extrusion could cause this effect in your prints. I would recommend trying a calibration (number 2 from the sticky) and see if that helps at all!
Ender 3 Neo - Jam Problem
Yesterday, 03:06 PM in Tips, Tricks and Tech Help