This printer is pretty impressive, size wise. For $400 you can have this sucker. Currently seeking funding on indiegogo: http://www.indiegogo.com/projects/lu...sed-3d-printer



This is probably the smallest (measuring just 250 x 120 x 30mm when folded) that you can really travel with, and you still have a building area of 90 x 90 x 90mm.
This printer is the best choice as your first 3d printer! It’s not expensive, and it one of most easy to use printer on the market.

Note: the electronic board on the side was still the prototype stage, the final version is thinner and has a protective enclosure
It was first designed when a customer asked for a small, portable 3D printer that he wanted ot use for printing dentals molds. He wanted the printer to be cheap and easy to use too. We started developing the LumiFold, and after some months of designing, building prototypes, going back to design again we came up with the current design of the LumiFold. And it proved to be so good, we decided to launch a crowfounding camping to provide everyone interested a cheap, portable and easy to use 3d printer!