Results 1 to 4 of 4
Thread: Newbie here
-
11-05-2014, 06:24 PM #1
- Join Date
- Nov 2014
- Posts
- 1
Newbie here
Hello ,
just got a Flashforge Creator pro and when trying to level the build bed I get the message to press M after the first adjustment. I'm doing this from the printer menu not computer. Can someone tell me where the M is or what I should press to continue the leveling?
Thanks,
R
-
11-05-2014, 07:43 PM #2
- Join Date
- Jul 2014
- Posts
- 83
Hi,
On the Flashforge Pro, the "M" button is the "ok" button in the middle of the 4 arrow buttons next to the LCD panel. That will end the leveling routine.
Are you using a piece of paper to test both extruders' heights? Some people suggest post-its, because they're a bit thinner than all-purpose paper.
Welcome to the forum. I'm sure you'll find lots of great information here, and don't hesitate to ask questions. You can help yourself out a bit by reading the sticky thread titled "Flashforge 3D Creator Forum". There's a lot of background, tips, and other goodness in there, and you can save yourself some 'waiting for answers' time by reading through that information.
Cheers,
John
-
11-05-2014, 08:50 PM #3Hex3D - 3D Printing and Design http://www.hex3d.com
-
11-05-2014, 10:11 PM #4
- Join Date
- Jul 2014
- Posts
- 83
I prefer to think that they 'liberated' the firmware.
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials