Results 1 to 5 of 5
Thread: True print envelop size
-
03-09-2015, 06:57 PM #1
- Join Date
- Feb 2015
- Location
- Flagstaff, AZ
- Posts
- 73
True print envelop size
When I see 8" 10" and 12" are those true sizes or do you lose like .5" or so?
-
03-09-2015, 08:36 PM #2
- Join Date
- Nov 2014
- Posts
- 522
with the micro binder clips i lost about a half inch
-
03-10-2015, 10:24 AM #3
Mini binder clips and refined X endstop switch placement gives me just about the full 200mm area on my i3v-8 - I'm maybe at about 198mm unless I scoot back the clips a bit.
Last edited by printbus; 03-10-2015 at 12:40 PM.
-
03-10-2015, 12:15 PM #4
- Join Date
- Feb 2015
- Location
- Flagstaff, AZ
- Posts
- 73
Thanks both for the input. I think I am just about ready to make my purchase and this was one of the last remaining questions.
-
03-10-2015, 12:24 PM #5
- Join Date
- Jul 2014
- Location
- Ontario, Canada
- Posts
- 257
I wonder if this is true of every printer on the market. I remember my old printrbot Simple stated a 4x4x4 build volume, but the reality was it was slightly smaller than that due to a few parts revisions which meant the Y axis lost 4-5mm. On my 10" i3v, using the mini binder clips, I have just over 240mm and that suites me just fine
Ender 3 Neo - Jam Problem
Yesterday, 12:39 PM in Tips, Tricks and Tech Help