Results 1 to 3 of 3
-
09-27-2014, 04:46 AM #1
- Join Date
- Sep 2014
- Posts
- 51
Question - Create Detail in Cad or Replicator?
OK, I'm one of those people that wants to understand some of the Basic things so here is my Question.
When Saving the STL from my Cad Program, I am given a Dialog that asks "Export Quality" with Fewer or More Polygons to select from.
Now when creating the GCode, I get "Object infill %" default is 10%
So what do others advise on either setting.
Thanks in Advance
Ken
VectorWorks.jpgReplicator.jpg
-
09-27-2014, 05:14 AM #2
- Join Date
- Sep 2014
- Posts
- 51
Here is the Name being Printed, the Object InFill ( Centres of the Letters ) is 10%, I did notice on a previous Name I did the Infill gaps were visible on the outside face of the Letters so was this because the infill was too low at 10%?
Fill.jpg
-
09-27-2014, 06:25 AM #3
Ender 3 Neo - Jam Problem
Yesterday, 03:06 PM in Tips, Tricks and Tech Help