hello everyone I would like an help to choosing the right nema to buy for my delta printer,
My choose is between:
-nema 17;
https://www.omc-stepperonline.com/nema-17-bipolar-59ncm-84oz-in-2a-42x48mm-4-wires-w-1m-cable-connector-17hs19-2004s1
-nema 23 ;
https://www.omc-stepperonline.com/it/motore-passo-passo-ibrido/nema-23-bipolare-126nm-1784ozin-28a-25v-57x56mm-4fili-?6mm-shaft-23hs22-2804s1.html