Results 1 to 2 of 2
Thread: Prusa i3 birdnest like issues
-
07-19-2023, 09:45 PM #1
- Join Date
- Jul 2023
- Posts
- 1
Prusa i3 birdnest like issues
image0 (1).jpg
After about 6ish layer or 10 minutes of printing this will happen. I've reduced print speed to 30mm/s have fan speed at 30% and am printing at a temp of 205. the PLA is rated for 190-220. can anyone help solve this reoccurring issue
-
07-20-2023, 12:21 AM #2
- Join Date
- May 2020
- Posts
- 621
Try 100% fan speed for PLA
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help