Results 1 to 3 of 3
Thread: Dumb mistakes
-
09-05-2014, 02:29 PM #1
Dumb mistakes
Hey does anyone have any idiot mistakes they have done with 3d printing?
I just rebuilt my QU-BD One Up extruder with a new frame and I put the frame on backwards so when it went to extrude it would pull the filament out instead of pushing it through
-
09-05-2014, 03:43 PM #2
- Join Date
- Jan 2014
- Posts
- 462
One of my printers has the unfortunate tendency to snag on part of the frame when homed after a really tall print job. When it happens it pulls the X belt loose and requires some disassembly to fix it (due to an unfortunate fan placement). It's easy to avoid if I lower or home Z before homing the other axes. Do I remember to do this? No. 7 times and counting.
Numerous times starting a print without filament in the machine.
That's all I'll admit to.
-
09-05-2014, 05:36 PM #3
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion