Results 1 to 2 of 2
Thread: Newbie with minor issues
-
12-31-2022, 08:29 AM #1
- Join Date
- Dec 2022
- Posts
- 1
Newbie with minor issues
Hi, new to 3D printing. Just got a FF Adventurer 3C, using FF PLA. Machine seams to work very well wit a few defects
Settings all default in Flashprint, slicer set to set to fine, bed 50C, nozzle 210C
When printing a gear part, I get strings over my hole and counterbores (only) and all my holes and counterbores are slightly undersized. Overall part is correct thickness, finish is great. 20mm cube prints perfect
Retraction settings are default
Any ideas appreaciated
-
12-31-2022, 01:14 PM #2
- Join Date
- May 2018
- Posts
- 561
printing to fast for the size of the part possibly, not enough info to know.
All holes when using my particular printer are .4mm under sized so I make the adjustment when I design my part. Some slicers have setting to try and compensate for the hole issue.. Welcome to the fun..
Extruder not feeding during print,...
Yesterday, 01:59 AM in Tips, Tricks and Tech Help