Results 1 to 2 of 2
-
12-16-2022, 07:58 AM #1
- Join Date
- Dec 2022
- Posts
- 1
Ender 3 V2 - Melted areas on the top of the first mm of layers - extreme jagged edges
Dear community. Can please somebody give me a tip what to try to remediate melting on top of the bottom layers of my PLA prints - screenshots attached. It is especially visible on the bigger flat surfaces. I managed to significantly reduce jaggedness by online tips, but this melting is driving me crazy. I tried levelling the bed with regular A4 sheet of paper several times (I know it is probably not ideal) - the screenshot of the Cura test is attached (not ideal as well). The temperature of the bed is 55, hotend 205. Thanks in advance.
-
01-16-2023, 09:49 PM #2
- Join Date
- Jan 2023
- Posts
- 36
Hello
It looks like wet pla you can tell if you extrude some and you hear a crackling noise or see steam coming off. This can be fixed by drying it out there are plenty of good videos using a oven or a dehydrator like this one https://www.youtube.com/watch?v=CTrG7OAlsEA
PlA should be kept dry to keep it good
Hope this helps have a great day
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help