Close



Results 1 to 3 of 3
  1. #1

    help needed for the first layer calibration

    Hi all,
    My printer is having stringing problem (I hope I got the name right).
    So far, i have tried: new filament and new nozzle. didn't help.

    Can any expert help?
    Thanks a ton
    Attached Images Attached Images

  2. #2
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,153
    Add Roberts_Clif on Thingiverse
    It would be easier to help if one could see a clear photograph .

    Let me take a guess, You should drop the Z-Offset to lower this offset by another -0.1

  3. #3
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,834
    those are big beads.
    To get answers it hekps to give information.

    As aminimum: printer type, print material, print settings: speed, layer thickness etc.

    And - if known - build plate material.

    It all makes a difference.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •