Results 1 to 5 of 5
Thread: Unable to prevent stringing
Threaded View
-
05-26-2022, 11:41 PM #1
- Join Date
- May 2022
- Posts
- 3
Unable to prevent stringing
Hey everybody, still pretty newb in the 3d printing world...I can not seem to get my settings right to avoid stringing with a certain filament. I have one role of hatchbox which was pretty easy to tune in. No stringing issues there. I bought a role of esun PLA however and no matter what I do with my settings it still gets terrible stringing (this is the filament --> https://www.esun3d.net/products/347.html) . I think i've tried everything... Is there anything I'm just not seeing? I've basically toggled all settings that I know of in Cura that could reduce stringing as far down as I can and still no luck. Here's the most recent ones... I'll upload a picture of the print I did with these settings as well. I'm on an Ender 3 V2
- retraction - 6.5
- temperature - 185
- speed - 35
- coasting - .064
- combing - not in skin
- outer wall wipe distance - .4
I realize combing for example won't really help on a stringing test (at least I don't think it would) but I'm getting desperate...
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion