Subscribe to Our Newsletter Advertise
Close



Results 1 to 3 of 3

Threaded View

  1. 04-21-2022, 07:05 AM #1
    dudical26
    dudical26 is offline
    Student
    Join Date
    Apr 2022
    Posts
    1

    Help with print settings for ASA

    Hello, I am trying to print with ASA for the first time and having problems getting the desired result. I'm using
    • Dynamism ASA 2.85mm
    • Ultimaker 3 (I don't have any type of enclosure)
    • Latest version of Cura Using the CURA preconfigured "FINE" settings
    • With the following changes
    • Print Temp - 250f
    • Bed Temp - 80f
    • Print Speed - 40mm/s
    • Cooling - Off
    • Infill - 100%
    • Also using Magigoo original



    • Here is what I am trying to printDesired Result.jpg
    • Print is not flat, it's warped upwards.IMG_4901.jpg
    • The structure at the back of the print is misalignedIMG_4902.jpg
    • Please help suggest what I should change in my settings.
    Last edited by dudical26; 04-21-2022 at 07:15 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules