Issue: Printhead moves away from Print randomly (Ender 3v2 + Cura)

[Filmoir]

I've been having an issue that I can't figure out: During prints, the printhead will randomly move away from the print for a second, as though catching it's breath, and then returns to printing. There's no verifiable pattern to it, so I can't predict when it will happen to record it happening. The only reason I know it's happening is because I've seen it in passing, and it sometimes leaves a doodle of extrusion as part of it's path away from the part. I originally thought it was part of the z-seam, however, on my most recent print, it's opposite of the seam. I've marked out what I'm talking about in the attached image.I'm printing on an Ender 3v2 with some upgrades (though I don't think it would affect the printing path?). I generate my G-Code using Cura 4.13.0. There's a bunch of different stuff checked in my profile (as I've been duct taping profiles together to get it to print without real direction...) But specifically I've tried changing the following to prevent this kind of travel during the print:Combing: AllRetract Before Outer Wall: CheckedAvoid Printed Parts When Traveling: UncheckedZ-Hop When Retracted: UncheckedMinimum Layer Time: 0.0sMinimum Speed: 10.0mm/sLift Head: UncheckedEnable Coasting: CheckedCoasting Volume: 0.02mm^3Maybe there's some other setting that's checked or not checked but hidden in Cura...If anyone can help me out with figuring out why my printer does this extra move and how to stop it, I would definitely appreciate it! If you need more information, let me know.Thanks!