Close



Results 1 to 8 of 8
  1. #1

    How to not print annoying "base"?

    Hi everyone.First day ever with a 3d printer. Bought a Flashforge Adventurer 3 for the ease of use.Can anyone tell me how to print, without the annoying "base" (se image).I am not sure what it is called and how to deactivate or activate it.
    Attached Images Attached Images

  2. #2
    What slicer are you using? The "base" can be either a raft (some thickness) or a brim or skirt.

  3. #3
    I am not sure I understand all the words you are using. I am have downloaded a STL-file from the web and opened it in Flashprint 5. I then export it or something to a file which I use on the printer.

  4. #4
    This link may be helpful. The slicer is Flashprint, a program which converts your imported STL file and creates the print file based on the settings you use (or the default settings).

    https://www.flashforge.com.hk/blog/3...r-big-3d-print

    You can ignore the "big print" aspect of this link. The brim settings are shown in the page about halfway down.

  5. #5
    I think it is the setting I was looking for. Thanks.

  6. #6
    glad to help.

  7. #7
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,788
    you can do that with a large brim that is not seperated from the model base or with a raft.
    A seperated brim of 2 or three lines is a good idea as it primes the print nozzle and ensures the actual model base has no missing lines.

  8. #8
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,143
    Add Roberts_Clif on Thingiverse
    Where did you download the nozzle

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •