Results 1 to 3 of 3
  1. #1

    Question Creator Pro/Micro Swiss Extruder & All Metal Hotend - Issues

    Recently I upgraded my extruder setup on my Flash Forge Creator Pro 2016. I went with one of the Micro Swiss dual extruder setups. As well as one of their all Metal Hotends (Heatbreak/Throat and nozzles). Upon installing them I've had severe issues leveling my bed, cuz the nozzles sit too low now. If I push the heatbreak further up into the cold block, well then I cant mount the extruder motors themselves anymore cuz it pushes them up out of the way of the mounting holes. I included a pic to help illustrate said dilemma.


    If I adjust the throats so I that I am able to mount the motors and get everything back together, then the nozzles basically sit right on the damn plate no matter how I adjust the plate springs. So basically I don't know what I should do. Admit defeat and put everything back to stock, or hopefully find an answer on here that will save me *fingers crossed*

  2. #2
    Student AnswrtekMike's Avatar
    Join Date
    Mar 2023
    Calhoun GA
    Follow AnswrtekMike On Twitter Add AnswrtekMike on Facebook Add AnswrtekMike on Thingiverse
    I am dealing with the exact same problem as well as trying to understand how to "level" the nozzles so either one will print right.

  3. #3
    you can use a spacer like this: it will offset the thickness by triggering the Z axis limit switch early. The models include 2 to 6 mm spacers, or you can resize the Z axis thickness to any size you want.Hope it helps.
    Last edited by Nozzle; 03-23-2023 at 11:14 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts