Results 1 to 3 of 3
Threaded View
-
08-23-2021, 04:06 AM #1
- Join Date
- Jul 2020
- Posts
- 14
Over extrusion despite E-step calibration with micro swiss direct drive extruder
Hello Everyone,
i am in the process of commissioning a micro swiss direct drive extruder. I calibrated the e-steps and verified the value multiple times with and without PTFE tubes/hotend attached. When printing a singe walled box i get a Wall thickness of 0.46 mm corresponding to a flow correction value of 0.87.
That seems excessive. Also the e-steps of 140 seem very high to me (before it was 96). Any idea what could be wrong or are values like that somehow normal for direct drive?
Regards,
Phillip
Ender 3 Neo - Jam Problem
Yesterday, 12:39 PM in Tips, Tricks and Tech Help