Results 1 to 3 of 3
Thread: Programming Bed Temp into GCODE
Threaded View
-
06-03-2021, 01:20 PM #1
- Join Date
- Jun 2021
- Posts
- 5
Programming Bed Temp into GCODE
I have a Monoprice Maker Select v2, and the default for the bed temp is 30 C. I always have to reprogram it to 50 C every print after the print start, and AFAIK there is no way of programming the default to 50 C.
I use CURA and I don't see a bed temperature setting in the file settings or profile.
Is there a way to set the bed temp within the GCODE, and if so, what is the line I need to put into the GCODE file?
Extruder not feeding during print,...
04-24-2024, 01:59 AM in Tips, Tricks and Tech Help