Results 1 to 3 of 3
Threaded View
-
05-08-2021, 10:14 AM #1
- Join Date
- May 2021
- Posts
- 1
Beginner question - my second print is failing
Hi everyone, I am new to 3d printing. I was able to set up my Ender 3 and print the test print it came with. It printed perfectly.However, I then downloaded some models from thingiverse and sliced them using Cura. I had the same issue every time, that the filament seemed to jumble up around the nozzle instead of getting laid out in layers on the bed. I tried layer sizes of 0.12, 0.16 and 0.2, and they all ended in a congealed jumble or amoeboid shape stuck to the nozzle.I made sure that I leveled the bed, and took time to make sure it was accurate.This is a video of how the failed print looks just before I cancel it - https://streamable.com/86rdonI would appreciate any tips on what I could try.Zach
Extruder not feeding during print,...
04-28-2024, 02:02 PM in Tips, Tricks and Tech Help