Close



Results 1 to 5 of 5
  1. #1
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse

    3D Printing in Sculpey

    These were done with Sculpey Original, 2mm nozzle, .5mm layers:








    Sorry about the focus. I've done some in greeen Sculpey III with a 1mm nozzle, I will bake them tonight and post images.

  2. #2
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    Pics of the green Sculpey III prints printing; 1mm nozzle, .5mm layers:









  3. #3
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    Here is one of the sculpey pieces (after baking) with a similar piece printed in ABS. The ABS plastic is done in .2mm layers, the sculpey in .5mm layers.



  4. #4
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    I've just been notifeid that these image links are no good. I have uploaded these images to http://hyrel3d.com/images/sculpey.rar for anyone who wants to see them.

    Here are a couple; the blue is ABS, the rest are Sculpey.

    sculpey.abs.both.50.jpg sculpey.250mic.inprog2.jpg

  5. #5
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    Yes, we have heads for DIW, Robocasting, DPE, HME, HME, FFF/FDM, lasering, machining, dynamic ratio blending, core-shell printing... we've even made one weld with. Ask me if you have a special need or combination of functions that other printers will not allow you to do. We can customize just about anything.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •