Hi all, first print, first post!


Ender 3 Pro, Cura slice software


159175218_288363449304405_7447153906461391998_n.jpg158430527_1880663902083297_4580687090963789250_n.jpgScreenshot 2021-03-13 210241.jpg


I’m getting these gaps in my walls (they’re supposed to be flat vertical) and I can’t really find a similar example on the internet to refer to and tweak my settings.


Initial layer height: 0.24
Layer height: 0.2
Print speed: 80
Initial layer speed: 30
Retraction: 6 / 25


Not sure if there are any other settings you’d need so let me know.


I presume this is a newbie issue so hopefully someone can give me some pointers. Thanks in advance!


Ben