Close



Results 1 to 4 of 4
  1. #1

    Best 3D Printer under 400

    Hello there!
    I've been researching on which 3D printer to buy.
    I decided to post this question here to get some suggestions from you guys.

    What I'm looking for in the printer is:
    • Should be under 400 not over 400.
    • Enclosed (I have a small room where it can get bad with the PLA smell if I stay while printing with an open printer).
    • Printing dimensions around 200x200


    I found this printer, which fits what I want but I don't know a lot about it and would appreciate it if any of you could tell me if it's good.
    https://www.amazon.com/gp/product/B0...0ZHNEOTR&psc=1

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,208
    well I can't see any obvious reasons not to buy it.
    Some of the reviews look a little bit suspect.
    Translation software clearly used on several of them.
    The couple of obviously genuine reviews seem positive.

    It's a decent specification. The vertical guide rods look like 8mm and for that build volume I'd prefer 10mm at least.
    But if the bearings are tight - it's probably not an issue.
    I mean it looks like a budget enclosed printer with a decent sized print volume.

    You are taking a bit of a gamble going with an unknown chinese manufacturer.
    For similiar money - albeit with a smaller build volume I'd - personally - be inclined to go for the qidi - https://www.amazon.com/QIDI-Technolo...5WP3HSTKEG0QPE

    But that's pretty much because qidi are a known quantity and generally produce decent machines.

    But like I said, I can't see any obvious reasons not to get the huafast machine - just my natural wariness of brand new and unknown small chinese 'brands'.
    And some fairly suspect 'reviews'.
    Last edited by curious aardvark; 01-13-2021 at 08:46 AM.

  3. #3
    That's an interesting one because I had that one as my prefer choice before finding the Huafast. The only reason I switched them is because the printing dimension is bigger.

  4. #4
    Maybe used one?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •