Close



Results 1 to 4 of 4
  1. #1

    Does this look like over extrusion late in the print?

    IMG_9515.jpg The print in the foreground failed yet remained firmly adhered to the bed (glue stick over painters tape). I aborted the print after the extrusion head assembly started bumping against the print. Any ideas on how to avoid this happening? Printer with cura on a Printrbot Simple Metal. 200f heat, 1.75 PLA, 60 speed.

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,211
    what sort of print area cooling does it have ?
    If none look on thingiverse for some mods.

    Could just be that.

  3. #3
    It does have that, thanks for the idea though. I think I discovered my simple problem, the z axis threaded rod had a somewhat loose screw on the coupler. Tightened that up, hopefully that gets things back on track!

    Quote Originally Posted by curious aardvark View Post
    what sort of print area cooling does it have ?
    If none look on thingiverse for some mods.

    Could just be that.

  4. #4
    If none look on thingiverse for some mods.







    192.168.100.1 192.168.1.1 jpg to pdf
    Last edited by efhtrjty; 01-15-2021 at 05:05 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •