Results 1 to 2 of 2
-
12-27-2020, 01:02 AM #1
- Join Date
- Dec 2020
- Posts
- 2
MKS BASE V1.1 Firmware Requests Please ?..
Hello,I have an Aurora3d Prusa i3 using a MKS Base v1.1 atmega board. I have tried repetier and I can get pretty much everything to work. The only issue is the extruder motor wont run. https://chatrandom.livehttps://topda...com/chatrandom
https://topdatingwebsitesx.com/camsurf I have verified that the motor does work by plugging it into a different controller port.anyone have the original firmware please?thanksalexsunnyLast edited by alexsunny123; 12-30-2020 at 11:51 PM.
-
12-27-2020, 06:58 AM #2
Let me take a guess!
While the printer is stopped the hotbed and hot-end are cool every thing works except the extruder stepper.'
If this is your scenario then take a step back, if the hot-end is not at least 170C the extruder stepper motor is disabled.
This is an extruder stepper motor safety feature.
Extruder not feeding during print,...
Today, 02:02 PM in Tips, Tricks and Tech Help