Results 1 to 7 of 7
Thread: Slight Gaps
Threaded View
-
10-07-2020, 05:33 AM #1
- Join Date
- Oct 2020
- Posts
- 3
Slight Gaps
Hi All!
1st time post. rpinting for 8 years.
Printing in PLA at 190-195deg.
I keep getting slight gaps usually on the rear-left & front-left side.
I would increase flow rate (currently at 100%) but am already having some slight issues with stringing... (retraction currently set to 10mm @ 45mm/s)
any ideas?
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials