Help problems printing on Ender 3

[LACCART]

hi im having problems printing with my ender 3 could someone help me ?https://www.youtube.com/watch?v=p5oSOnI2OjEits like if the PLA didnt sit in the bed i dont really know why but it goes out of control

[Gambo]

It looks as if you have the nozzle to far from the bed! have you levelled the bed! there will be endless you tube videos showing you how to do this. You want to use a thi piece of paper too. Check my spacing with feeler gauges and the nozzle should be between 0.05 and 0.08 mm above the bed I have found.

[LACCART]

It looks as if you have the nozzle to far from the bed! have you levelled the bed! there will be endless you tube videos showing you how to do this. You want to use a thi piece of paper too. Check my spacing with feeler gauges and the nozzle should be between 0.05 and 0.08 mm above the bed I have found.

Thank you im going to try it rigth now