Results 1 to 3 of 3
Thread: Filament build up on nozzle
-
08-23-2020, 12:11 PM #1
- Join Date
- Aug 2020
- Posts
- 6
Filament build up on nozzle
during long prints filament has been building up in giant balls, sometimes pulling the piece off the bed. Any advice on how to fix this?
-
08-24-2020, 03:55 PM #2
- Join Date
- May 2020
- Posts
- 13
could be one of two things in my experience, over extrusion because of wrong calibration of the filament extruder. or, the nozzle isn't screwed on tight enough.
-
08-25-2020, 02:15 PM #3
- Join Date
- Aug 2020
- Posts
- 6
Extruder not feeding during print,...
04-28-2024, 02:02 PM in Tips, Tricks and Tech Help