Issue with Creator Max

[tonythedrony]

Hello everyone. I just got a FlashForge Creator Max. I know it's not a very good beginner printer, but I wanted something that I did not have to upgrade as I improve. Yesterday, I printed a spool holder for the Creator Max, and it worked great, everything went well. Today though, it starts stringing very badly on the inside, and it stops making the honeycomb/hexagon pattern that holds the part together on the inside. The more times I try again and print, the less it prints before it starts stringing on the inside. The only thing I did different between yesterday and today is that I used a raft. I stopped using a raft as it was nearly impossible to take of the model, and once I took off the model, the part of the raft where it is attached to the model itself, was attached so tightly I was unable to get it off. I am using PLA, with a 210C (celsius) temp for the extruder, and and 60C bed temperature. They are the exact same settings as yesterday, but instead i'm not using a raft, and it is much easier to take of the model and the model looks much better on the underside. I have attached three pictures below, from biggest to smallest. The biggest one was the second one (after the successful one) and the second smaller one was the third print and the last picture with the smallest print was the last print. Thanks for your help.