Hi all,

Hope you can help.
Having a strange issue with my TAZ5.

When printing cylindrical objects on PLA there seems to be layer positioning issues but only down one side of the print.

As you an from the print, there are bumps down only one side, at first i assumed a slack X axes but the side on the polar opposite is perfectly smooth which I believe would disprove my theory?

In any case all belts seem tight with no slop, the layer shifts are only on one side of the X plane.
Any ideas would be greatly appreciated.

Thanks in advance!

thumbnail_IMAG2369.jpgthumbnail_IMAG2368.jpg