Close



Results 1 to 5 of 5
  1. #1
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse

    Soldiers print masks with Hyrel equipment.

    SFC Atkins and SFC Alvarado, with the Georgia ARNG at Ft. Stewart, model the protective masks they printed. They are standing in front of the Hyrel 3D 16A printers which made the masks.
    Attached Images Attached Images

  2. #2
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    https://www.facebook.com/122ndRTIGeorgia/ made a post about it, too.

  3. #3
    It would be interesting to know the prime cost of one mask...

  4. #4
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    Well, the gcode to print all the parts claims 30m of filament.

    An online filament calculator says 1kg of ABS has 400m of filament, which normally costs about $20.

    So we can print (ideally) 13 sets of masks for $20 of filament, or about $1.50 per mask (material cost without misprints).

  5. #5
    Thank you for calculating, it's a reasonable price!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •