Results 1 to 4 of 4
Thread: Model Not Printing Well
-
02-17-2020, 06:14 AM #1
- Join Date
- Feb 2020
- Posts
- 8
Model Not Printing Well
Hello Everyone
Can someone help me with this stl
its printing abnormally
can someone help me with it?
https://imgur.com/UUK6LSy
https://imgur.com/rHolbF7
https://imgur.com/TeYs7H1
-
02-17-2020, 07:06 AM #2
we need more details:
printer, print settings, filament, slicer, temperatures, speeds etc.
The more details you give us - the better chance we have of diagnosing a problem.
I keep telling people - we are not psychic and can only work with what information you give us.
So far you have given us ABSOLUTELY NO DETAILS WHATSOEVER. :-)
But I would say you are printing too fast and too cold. And possible with the wrong filament diameter.
Look at it this way, if you phoned a doctor up and said: 'i'm ill, cure me.'.
He would then spend 10 minutes trying to work out what was wrong with you.
Well this is the same :-)
-
02-18-2020, 05:00 AM #3
- Join Date
- Feb 2020
- Posts
- 8
printer : Formbot T-Rex 2
Filament using : PLA
slicer : Cura 15.04.2
printing settings on the photos please below :
https://ibb.co/8c8Z2Pv
https://ibb.co/WKBDg04
-
03-01-2020, 06:42 AM #4
- Join Date
- Mar 2020
- Posts
- 6
I couldn't access the photos of the prints, but I looked at the settings and agree with curious aardvark. Probably printing to cold. I'd try 220 or so. Also, sometimes the coloured PLAs don't print as well at the normal PLA printing temp as the white and black PLAs do. So it depend what colour you're printing too.
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials