Results 1 to 5 of 5
Thread: heated bed issue
Threaded View
-
12-20-2019, 09:35 AM #1
- Join Date
- Dec 2019
- Posts
- 5
heated bed issue
Hello everyone and my first post.
My Creality CR10s prints perfect with PLA and a cold bed.
Trying to print ABS with a heated bed gave me problems and by chance I found the reason.
I level the bed and set the nozzle/bed distance to 0.1mm. As soon as the bed is hot this distance increases to 0.3mm.
That means in order to get a good print I have to set the distance with the bed hot. The problem with that besides burning youself
is when the print is done and I set the nozzle to the home position, the nozzle will dig into the glass once the bed is cold again.
I changed the initial layer height but it turned out not affecting the initial z-position.
What is expanding and how can I fix this?
Extruder not feeding during print,...
Yesterday, 02:02 PM in Tips, Tricks and Tech Help