Results 1 to 6 of 6
Thread: What can cause this issue:
Threaded View
-
05-27-2019, 12:39 AM #1
- Join Date
- May 2019
- Posts
- 4
What can cause this issue:
First of all, sorry if it's not the best place to post it.I am facing this issue (see attached pictures) and I have no idea why. I have a CR-10 Mini with just few hours of use. Although I didn't know how to properly adjust it. The Y belt tension is apparently correct.I'm using TH3D firmware (latest version), but the same was happening with Marlin 1.1.9.I already tried re-installing the stock firmware unsuccessfully (The LCD gets all messed)What can cause this?
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion