Close



Results 1 to 4 of 4
  1. #1

    Creality CR-10S Pro loud fillament cooling fan

    Hi,does anybody have a good idea on how to reduce the noise of the fillament cooling fan on a CR-10s Pro? Can the speed be controlled by software?Is there a more silent fan-replacement?Sorry for my stupid questions - i am completely new to 3D-printing.

  2. #2
    Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    636
    Add Roberts_Clif on Thingiverse
    Yes!!! You are correct on all.

    Excluding calling your questions stupid, There is only one stupid question - that is a question that was never asked!!!


    You should have control of the fan on your CR 10 through the LCD Fan Speed menu Item.
    OR
    http://marlinfw.org/docs/gcode/M106.html
    Last edited by Roberts_Clif; 05-08-2019 at 10:43 AM.

  3. #3
    Thank you for the hint!
    I see there is much to learn about 3d printing basics - but' it's exciting

    Next step for me is to understand what firmware is the best for the CR-10s Pro, where to download and what to configure.

    Ufff... gonna have a hard time this weekend

  4. #4
    Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    636
    Add Roberts_Clif on Thingiverse
    What are you looking for, your CR10 is basically a newer version of my 3DP11 and 3DP12 - 3D Printers

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •