After weeks of looking at youtube and searching google for my problem i cant find anything to fix it.

What im useing
  • Ender-3
  • PLA 1.75mm 200C
  • Glassbed 70C
  • Steel nozzle 0.4
  • To make the print stick i use Gagigoo 3D printing Pen
  • Softwear Cura, with the recomended profile for a 0.4

What i get after weeks of bed leveling, buying more stuff thinking it will fix my problem is headaches, frustration and failed prints.

I have tryed the papper bed leveling so many times i lost count. Then i tryed bed leveling with gcode and print but the print curves up and sticks to the nozzle and tangled into a mess. Also if for some miracle it sticks to the bed it becomes a thin line with blobs on it and is barely holding on to the bed before the nozzle comes back and scopes it up.

I recently printed (Well tried to) and the first layer didn't go well. As it continued i could hear cracking and snapping sounds comming from it. After a short while it left the bed and started to travel with the nozzle.


20181223_105931.jpg20181223_111308.jpg

Please help me i cant get it to work whatever i do.