Close



Results 1 to 3 of 3
  1. #1

    Diameters of teflon liners

    Does anyone know the actual diameters for teflon liners inside the hotends for MK10 and MK11 for 1.75mm and 3mm filaments.

    I would have thought the inside diameter was slightly larger than the filament and the outer diameter slightly smaller than the barrel but I can't find any specific figures.

    Thanks

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    6,329
    can't help with the 3mm but 1.75 is usualy 4mm od by 2mm id.

  3. #3
    Student
    Join Date
    Dec 2018
    Location
    Atlanta
    Posts
    6
    Add Sarcoise on Thingiverse
    Quote Originally Posted by doby View Post
    Does anyone know the actual diameters for teflon liners inside the hotends for MK10 and MK11 for 1.75mm and 3mm filaments.

    I would have thought the inside diameter was slightly larger than the filament and the outer diameter slightly smaller than the barrel but I can't find any specific figures.

    Thanks
    I can confer with aardvark as I just purchased a new Teflon liner and was surprised after doing some reading that it was .25mm larger ID at 2mm.

    AT symbols are parsed as links apparently..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •